display http-url deny

Function

The display http-url deny command displays statistics on URLs that match the blacklist.

This command is supported only on the NetEngine 8000 F1A.

Format

display http-url deny url-name [ clear ]

Parameters

Parameter	Description	Value
url-name	Specifies a webpage address.	The value is a string of 1 to 200 characters.
clear	Indicates that statistics on URLs that match the blacklist are cleared.	-

Parameter

Description

Value

url-name

Specifies a webpage address.

The value is a string of 1 to 200 characters.

clear

Indicates that statistics on URLs that match the blacklist are cleared.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
portal	execute

Usage Guidelines

Usage Scenario

If forcible Web authentification or forcible portal operation is performed, after a blacklist is configured, packets that match the blacklist will be discarded to reduce the CPU usage. The display http-url deny command displays statistics on URLs that match the blacklist.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display statistics on the URL that matches the blacklist www.example.com.

<HUAWEI> system-view
[~HUAWEI] display http-url deny www.example.com
slot 1 Deny Count : 0

**Table 1** Description of the **display http-url deny** command output
Item	Description
slot 1 Deny Count	Number of blacklist entries on the slot 1.