display ip-pool pool-usage domain

Function

The display ip-pool pool-usage domain command displays the usage of the address pool of every domain.

This command is supported only on the NetEngine 8000 F1A.

Format

display ip-pool pool-usage [ domain domain-name ]

Parameters

Parameter	Description	Value
domain-name	Specifies the name of a domain.	-

Parameter

Description

Value

domain-name

Specifies the name of a domain.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
ippool	read

Usage Guidelines

Usage Scenario

If no domain is specified, the usage of the address pool of every domain is displayed. If a domain is specified, only the usage of the address pool of the specified domain is displayed. If an address pool is bound to multiple domains, the address pool is counted once. If users go online from one domain bound to the address pool, the usage of the other domains bound to the address pool is also counted.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the usage of the address pool of a specific domain.

<HUAWEI> display ip-pool pool-usage domain huawei
  -----------------------------------------------------
  Domain name              PoolLen       Used  Ratio
  -----------------------------------------------------
  huawei                     65278          1     0%
  -----------------------------------------------------

**Table 1** Description of the **display ip-pool pool-usage domain** command output
Item	Description
Domain name	Name of a domain.
PoolLen	Total number of IPv4 addresses in the domain.
Used	Number of used IPv4 addresses in the domain.
Ratio	Usage of the IPv4 address pool of the domain.