display ip policy-based-route

Function

The display ip policy-based-route command displays enabled policies.

display ip policy-based-route

None

All views

1: Monitoring level

Task Name	Operations
cli	read

Usage Scenario

To check enabled policies, run the display ip policy-based-route command.

The actual command output varies according to the device. The command output here is only an example.

# Display enabled local policies.

<HUAWEI> display ip policy-based-route
policy Name                     Interface
aaa                          GigabitEthernet0/1/0

**Table 1** Description of the **display ip policy-based-route** command output
Item	Description
policy Name	Name of a PBR policy.
Interface	An interface-based PBR policy, which applies to all packets received on the local interface.