display ipsec performance

Function

The display ipsec performance command displays the IPsec performance indicators of a board.

This command is supported only on the NetEngine 8000 F1A.

Format

display ipsec performance slot slot-id

Parameters

Parameter	Description	Value
slot slot-id	Specifies a slot ID.	The value is a string of 1 to 32 case-sensitive characters, spaces not supported.

Parameter

Description

Value

slot slot-id

Specifies a slot ID.

The value is a string of 1 to 32 case-sensitive characters, spaces not supported.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
ipsec	write

Usage Guidelines

Usage Scenario

To query the IPsec performance indicators of a board, such as the CPU usage of the board and encryption and decryption performance, run the display ipsec performance command.

The packet length shown in the command output indicates the length of the IPsec packet excluding the Layer 2 header.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display detailed information about the IPsec performance indicators of the board in slot 1.

<HUAWEI> display ipsec performance slot 1
Slot 1:                                                        
   vcpu usage: 0%

   encrypt/decrypt performance:
    packet size |          pps          |          kbps         |
       total    |          0/0          |          0/0          |

**Table 1** Description of the **display ipsec performance** command output
Item	Description
Slot 1	Slot 1.
vcpu usage	Maximum usage of this CPU among all forwarding threads.
encrypt/decrypt performance	Encryption/decryption performance.
packet size	Packet length range.
pps	Number of encrypted/decrypted packets within 1s.
kbps	Number of encrypted/decrypted kbits within 1s.