display ipv6 nd rate-limit interface

Function

The display ipv6 nd rate-limit interface command displays the ND packet rate limit of an interface.

Format

display ipv6 nd { na | ns-multicast | ns-unicast } rate-limit interface { interface-type interface-num | interface-name }

Parameters

Parameter	Description	Value
na	Neighbor advertisement.	-
ns-multicast	Neighbor solicitation-Multicast.	-
ns-unicast	Neighbor solicitation-Unicast.	-
interface-type	Specifies the type of a specified interface.	-
interface-num	Specifies the number of a specified interface.	-
interface-name	Specifies the name of a specified interface.	-

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
soc	read

Usage Guidelines

Usage Scenario

To check the ND packet rate limit information on an interface, including the ND (NA, NS multicast, and NS unicast) packet rate limit and interface information, run the display ipv6 nd rate-limit interface command.

Precautions

This command is not applicable to Layer 2 Ethernet interfaces, flexible access interfaces, QinQ stacking interfaces, or QinQ mapping interfaces, or EVC sub-interfaces.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the NA packet rate limit of GE 0/1/1.

<HUAWEI> display ipv6 nd na rate-limit interface gigabitethernet 0/1/1
Interface : GigabitEthernet0/1/1
Ipv6 na rate-limit : 100 (default-value)

**Table 1** Description of the **display ipv6 nd rate-limit interface** command output
Item	Description
Interface	Interface information.
Ipv6 na rate-limit	Rate limit on NA packets.