display l2tp blocked-slot

Function

The display l2tp blocked-slot command displays the blocked tunnel board.

This command is supported only on the NetEngine 8000 F1A.

display l2tp blocked-slot

None

All views

1: Monitoring level

Task Name	Operations
l2tp	read

Before creating an L2TP tunnel, check the blocked tunnel boards. L2TP tunnels cannot be established on the blocked tunnel boards.

The actual command output varies according to the device. The command output here is only an example.

# Check the blocked tunnel boards.

<HUAWEI> display l2tp blocked-slot

**Table 1** Description of the **display l2tp blocked-slot** command output
Item	Description
display	Display current system information.
l2tp	Display l2tp information.
blocked-slot	The interface board that is blocked.