display loop-detect interface

Function

The display loop-detect interface command displays the loop detection configuration of a specified interface.

Format

display loop-detect interface { interface-name | interface-type interface-num }

Parameters

Parameter	Description	Value
interface-name	Specifies the name of an interface.	-
interface-type interface-num	Specifies the type and number of an interface.	-

Parameter

Description

Value

interface-name

Specifies the name of an interface.

interface-type interface-num

Specifies the type and number of an interface.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
vlan	read

Usage Guidelines

Usage Scenario

The command displays the loop detection configuration of a specified interface.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the loop detection configuration on a interface.

<HUAWEI> display loop-detect interface GigabitEthernet 0/1/0.1
GigabitEthernet0/1/0.1 LOOP-DETECT: 
  loop-detect enable
  loop-detect block 100 
  loop-detect priority 10 
  loop-detect detection vid 1  
  loop-detect only-alarm
  loop-detect identifier 123

**Table 1** Description of the **display loop-detect interface** command output
Item	Description
LOOP-DETECT	LOOP-DETECT.