display nat64 alg server-list

Function

The display nat64 alg server-list command displays the list of NAT64 ALG IPv4 server addresses for application layer protocols.

This command is supported only on the NetEngine 8000 F1A.

Format

display nat64 alg server-list protocol { all | dns | ftp | http }

Parameters

Parameter	Description	Value
all	Displays the list of NAT64 ALG IPv4 server addresses for all application layer protocols.	-
dns	Displays the list of NAT64 ALG IPv4 server addresses for DNS.	-
ftp	Displays the list of NAT64 ALG IPv4 server addresses for FTP.	-
http	Displays the list of NAT64 ALG IPv4 server addresses for HTTP.	-
protocol	Specify protocol of server.	-

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
nat	read

Usage Guidelines

After a list of NAT64 ALG IPv4 server addresses for application layer protocols is configured, to view information about the list for a specific or all application layer protocols, run the display nat64 alg server-list protocol command.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the list of NAT64 ALG IPv4 server addresses for all application layer protocols.

<HUAWEI> display nat64 alg server-list protocol all
nat64 alg server-address 192.168.1.1 protocol dns
nat64 alg server-address 192.168.1.2 protocol ftp
nat64 alg server-address 192.168.1.3 protocol http

**Table 1** Description of the **display nat64 alg server-list** command output
Item	Description
nat64 alg server-address 192.168.1.1 protocol dns	IPv4 server address of the NAT64 ALG for DNS.
nat64 alg server-address 192.168.1.2 protocol ftp	IPv4 server address of the NAT64 ALG for FTP.
nat64 alg server-address 192.168.1.3 protocol http	IPv4 server address of the NAT64 ALG for HTTP.