The display nat session aging-time command displays the aging time of NAT sessions.
This command is supported only on the NetEngine 8000 F1A.
The actual command output varies according to the device. The command output here is only an example.
<HUAWEI> display nat session aging-time
tcp protocol timeout : 240 (s)
udp protocol timeout : 240 (s)
icmp protocol timeout : 20 (s)
fragment timeout : 5000 (ms)
fin-rst protocol timeout : 5 (s)
syn protocol timeout : 5 (s)
dns protocol timeout : 240 (s)
ftp protocol timeout : 600 (s)
http protocol timeout : 240 (s)
rtsp protocol timeout : 240 (s)
sip protocol timeout : 1800 (s)
pptp protocol timeout : 180 (s)
long-link timeout : 200 (h)
Item | Description |
---|---|
tcp protocol timeout | Aging time of NAT sessions of TCP. |
udp protocol timeout | Aging time of NAT sessions of UDP. |
icmp protocol timeout | Aging time of NAT sessions of ICMP. |
fragment timeout | Aging time of NAT sessions of the fragment protocol. |
fin-rst protocol timeout | Aging time of NAT sessions of FIN-RST. |
syn protocol timeout | Aging time of NAT sessions of SYN. |
dns protocol timeout | Aging time of NAT sessions of DNS. |
ftp protocol timeout | Aging time of NAT sessions of FTP. |
http protocol timeout | Aging time of NAT sessions of HTTP. |
rtsp protocol timeout | Aging time of NAT sessions of RTSP. |
sip protocol timeout | Aging time of NAT sessions of SIP. |
pptp protocol timeout | Aging time of NAT sessions of PPTP. |
long-link timeout | Aging time of NAT sessions of long TCP connections. |