display network-header-length configuration

Function

The display network-header-length configuration command displays network header lengths configured for interfaces.

Format

display slot slot-id network-header-length configuration [ verbose ]

Parameters

Parameter	Description	Value
verbose	Displays detailed information about network header lengths configured for interfaces.	-
slot slot-id	Specifies the slot ID of a board.	The value is an integer that ranges from 1 to 16.

Parameter

Description

Value

verbose

Displays detailed information about network header lengths configured for interfaces.

slot slot-id

Specifies the slot ID of a board.

The value is an integer that ranges from 1 to 16.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
qos	read

Usage Guidelines

Usage Scenario

After a network header length is configured for an interface using the port shaping shaping-value network-header-length network-header-length command, you can run the display network-header-length configuration command to check the configured value.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display network header lengths configured for interfaces on the board in slot 1.

<HUAWEI> display slot 1 network-header-length configuration verbose
[network-header-length brief information]
Total number used: 1
Current used network-header-length: 20
Network-header-length: 20
Reference relationships : GigabitEthernet0/1/0

**Table 1** Description of the **display network-header-length configuration** command output
Item	Description
Total number used	Total number used.
Current used network-header-length	Network header lengths configured for interfaces.
Reference relationships	Interface for which the network header length is configured.
Network-header-length	Network header length.