display port isolate-state

Function

The display port isolate-state command displays information about isolated interfaces.

Format

display port isolate-state { all | { vlan vlanid | interface { interface-type interface-num | interface-name } } ^* } [ slot slotid ]

display port isolate-state { all | { vlan vlanid | interface { interface-type interface-num | interface-name } } ^* }

Parameters

Parameter	Description	Value
all	Specifies the all interface.	-
vlan vlanid	Displays information about isolated interfaces with a specified VLAN ID. If an interface is added to two VLANs, vlan vlan-id specifies the outer VLAN ID.	The value is an integer ranging from 1 to 4094.
interface interface-type	Specifies the interface type.	-
interface interface-num	Specifies the interface number.	-
interface interface-name	Specifies the interface name.	-
slot slotid	Displays information about isolated interfaces on a board in a specified slot.	The value is a string of 1 to 15 case-sensitive characters, spaces not supported.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
vlan	read

Usage Guidelines

Usage Scenario

To check information about all isolated interfaces on a device, run the display port isolate-state command. To check information about a specified isolated interface or isolated interfaces in a specified VLAN, specify an interface or a VLAN in the command.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display information about isolated interfaces.

<HUAWEI> display port isolate-state vlan 1
Port                   Vlan  CE-Vlan
--------------------------------------------------------
GigabitEthernet0/1/1   1     1

**Table 1** Description of the **display port isolate-state** command output
Item	Description
Port	Isolated interface.
Vlan	Outer VLAN ID.
CE-Vlan	Inner VLAN ID.