display ptp-adaptive

Function

The display ptp-adaptive all command displays the configuration of the 1588 ACR or 1588 ATR function.

Format

display ptp-adaptive all

display ptp-adaptive server [ server-id ]

display ptp-adaptive client [ client-id ]

Parameters

Parameter Description Value
server server-id

Displays 1588 ACR/ATR configurations on a specified server.

The value is 1 to 2.

client client-id

Displays 1588 ACR/ATR configurations on a specified client.

The value is an integer ranging from 0 to 511.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name Operations
clksync read

Usage Guidelines

Usage Scenario

This command is used to display the configuration and running information about 1588 ACR or 1588 ATR.

Example

The actual command output varies according to the device. The command output here is only an example.

# When the profile is not configured, the display ptp-adaptive all command displays the following information on the server.
<HUAWEI> system-view
[~HUAWEI] display ptp-adaptive all
  Device config info
  ------------------------------------------------------------------------------
  Ptp adaptive state                         :enable                           Device type                         :server
  Sync mode                                     :frequency                      Current state                      :master
  Packet dscp                                   :56                                   Domain value                     :0
  Local ip                                           :33.33.33.20                  Profile                                   :none
  Server board                                  :6
  VPN                                                 :none
  Client info
  ID         Ip Address                         Clock ID                             Mode            Announce        Sync     Delay_resp
  ------------------------------------------------------------------------------
  1        500 33.33.33.10                  00259efffed1efcf             two-way              1                  -3                -3
  2        489 11.11.11.10                  286ed4fffebcdc76          one-way              1                  -3                -3
# The display ptp-adaptive client command displays the following information on the server.
<HUAWEI> system-view
[~HUAWEI] display ptp-adaptive client 0
  *************************client0   information begin**************************
  Client id                                   :0                                        IP address                            :33.33.33.10
  Clock id                                   :00259efffed1efcf            Mode                                      :two-way
  Announce interval                 :1                                        Announce duration              :300
  Sync interval                           :-3                                      Sync duration                        :300
  Delay_resp interval               :-3                                      Delay_resp duration           :300
  Receive packet statistics
  ------------------------------------------------------------------------------
  Signaling                                  :1                                      Delay_req                              :0
  Send packet statistics
  ------------------------------------------------------------------------------
  Signaling                                  :0                                     Announce                               :564
  Sync                                          :0                                     Delay_resp                             :0
  Discard packet statistics     
  ------------------------------------------------------------------------------
  Signaling                                 :1
  Delay_req                                :0
  *************************client0   information end****************************
# The display ptp-adaptive client command displays the following information on the server.
<HUAWEI> system-view
[~HUAWEI] display ptp-adaptive client
  *************************client0   information begin**************************
 Client id                                :0                                        IP address                            :33.33.33.10
  Clock id                                 :00259efffed1efcf            Mode                                      :two-way
  Announce interval               :1                                        Announce duration              :300
  Sync interval                         :-3                                      Sync duration                        :300
  Delay_resp interval            :-3                                       Delay_resp duration           :300
  Receive packet statistics
  ------------------------------------------------------------------------------
  Signaling                              :1                                        Delay_req                              :0
  Send packet statistics
  ------------------------------------------------------------------------------
  Signaling                              :0                                        Announce                               :564
  Sync                                       :0                                        Delay_resp                            :0
  Discard packet statistics
  ------------------------------------------------------------------------------
  Signaling                             :1
  Delay_req                            :0
  *************************client0   information end****************************
  *************************client1   information begin**************************
  Client id                                 :1                                        IP address                           :33.33.33.11
  Clock id                                 :00259efffed1efc0           Mode                                     :two-way
  Announce interval               :1                                        Announce duration             :300
  Sync interval                        :-3                                       Sync duration                       :300
  Delay_resp interval            :-3                                      Delay_resp duration           :300
  Receive packet statistics
  ------------------------------------------------------------------------------
  Signaling                              :1                                       Delay_req                              :0
  Send packet statistics
  ------------------------------------------------------------------------------
  Signaling                              :0                                      Announce                               :564
  Sync                                       :0                                      Delay_resp                            :0
  Discard packet statistics
  ------------------------------------------------------------------------------
  Signaling                             :1
  Delay_req                            :0
  *************************client1   information end****************************
# After configuring 1588 ATR hop-by-hop mode, the display ptp-adaptive all command displays the following information.
<HUAWEI> system-view
[~HUAWEI] disp ptp-adaptive all
  Device config info                                                                                                                
  ------------------------------------------------------------------------------                                                    
  Ptp adaptive state      :enable           Device type        :client                                                              
  Sync mode               :time             Current state      :slave                                                               
  Packet dscp             :56               Domain value       :44                                                                  
  Announce interval       :10               Announce duration  :300s                                                                
  Sync interval           :3                Sync duration      :300s                                                                
  Delay_resp interval     :3                Delay_resp duration:300s                                                                
  Announce receipt timeout:3                One-way or two-way :two-way                                                             
  Local ip                :20.20.20.120     Profile            :time                                                                
  Client board            :5                Hop-by-hop mode    :yes                                                                 
  VPN                     :none                                                                                                     
                                                                                                                                    
  BMCA run info                                                                                                                     
  ------------------------------------------------------------------------------                                                    
  Current trace source    :server1                                                                                                  
                                                                                                                                    
  Time performance statistics                                                                                                       
  ------------------------------------------------------------------------------                                                    
  Realtime(T2-T1)   :+2s, 0ns                                                                                                       
  Max(T2-T1)        :-1s, 294967296ns                                                                                               
  Min(T2-T1)        :+0s, 460392448ns
# After the time profile is configured, the display ptp-adaptive all command displays the following information on the server.
<HUAWEI> system-view
[~HUAWEI] display ptp-adaptive all
  Device config info
  ------------------------------------------------------------------------------
  Ptp adaptive state                        :enable                            Device type                        :server
  Sync mode                                    :time                                 Current state                     :master
  Packet dscp                                  :56                                     Domain value                   :44
  Local ip                                          :33.33.33.20                    Profile                                 :time
  Server board                                 :6
  VPN                                                :none
  Client info
   ID       Ip Address                           Clock ID                           Mode           Announce   Sync   Delay_resp
  ------------------------------------------------------------------------------
  1        500 33.33.33.10               00259efffed1efcf               two-way           1                 -3           -3
  2       489 11.11.11.10                286ed4fffebcdc76            two-way            1                 -3            -3
# After the frequency profile is configured, the display ptp-adaptive all command displays the following information on the server.
<HUAWEI> system-view
[~HUAWEI] display ptp-adaptive all
  Device config info
  ------------------------------------------------------------------------------
  Ptp adaptive state                         :enable                           Device type                        :server
  Sync mode                                     :frequency                      Current state                     :master
  Packet dscp                                   :56                                   Domain value                   :4
  Local ip                                           :33.33.33.20                  Profile                                 :frequency
  Server board                                  :6
  VPN                                                 :none
  Client info
  ID          Ip Address                         Clock ID                          Mode             Announce    Sync      Delay_resp
  ------------------------------------------------------------------------------
 1   500 33.33.33.10      00259efffed1efcf  two-way     1       -3    -3
  2       489  11.11.11.10                   286ed4fffebcdc76         one-way             1                 -3          -3
# The display ptp-adaptive all command displays the following information on the client.
<HUAWEI> system-view
[~HUAWEI] display ptp-adaptive all
  Device config info
  ------------------------------------------------------------------------------
  Ptp adaptive state      :enable           Device type        :client
  Sync mode               :frequency        Current state      :slave
  Packet dscp             :56               Domain value       :0
  Announce interval       :11               Announce duration  :300s
  Sync interval           :3                Sync duration      :300s
  Delay_resp interval     :3                Delay_resp duration:300s
  Announce receipt timeout:3                One-way or two-way :one-way
  Local ip                :3.3.3.5          Profile            :none
  Client board            :1
  VPN                     :none

  BMCA run info
  ------------------------------------------------------------------------------
  Current trace source    :server1

  Time performance statistics
  ------------------------------------------------------------------------------
  Realtime(T2-T1)   :+0s, 619589345ns
  Max(T2-T1)        :+0s, 294942707ns
  Min(T2-T1)        :-0s, 0ns

  Remote server info
  ------------------------------------------------------------------------------
           Ip address       Negotiate state   Pri1   Class   Accuracy   Pri2
  Server1: 3.3.3.4          Nego success      128    84      0x22       128
  Server2:
# After the frequency profile is configured, the display ptp-adaptive all command displays the following information on the client.
<HUAWEI> system-view
[~HUAWEI] display ptp-adaptive all
  Device config info
  ------------------------------------------------------------------------------
  Ptp adaptive state      :enable           Device type        :client
  Sync mode               :frequency        Current state      :slave
  Packet dscp             :56               Domain value       :4
  Announce interval       :11               Announce duration  :300s
  Sync interval           :3                Sync duration      :300s
  Delay_resp interval     :3                Delay_resp duration:300s
  Announce receipt timeout:3                One-way or two-way :one-way
  Local ip                :3.3.3.5          Profile            :frequency
  Client board            :1
  VPN                     :none

  BMCA run info
  ------------------------------------------------------------------------------
  Current trace source    :server1

  Time performance statistics
  ------------------------------------------------------------------------------
  Realtime(T2-T1)   :+0s, 990847154ns
  Max(T2-T1)        :+0s, 294848249ns
  Min(T2-T1)        :+0s, 3623ns

  Remote server info
  ------------------------------------------------------------------------------
           Ip address       Negotiate state    SSM    Priority    PTSF
  Server1: 3.3.3.4          Nego success       PRC    1           normal
  Server2:
# The display ptp-adaptive server command displays the following information on the client.
<HUAWEI> system-view
[~HUAWEI] display ptp-adaptive server 1
**************************server1 information begin***************************
  Server id                                :1                                        Ip address                         :10.1.1.1/24
  Grand clock id                      :704433fffe297564         Time source                      :0x10
  Parent clock id                     :504123fffe293344          Parent portnumber          :1
  Priority1                                 :128                                    Priority2                              :128
  Clock class                          :84                                       Clock accuracy                 :0x22
  Two-step flag                       :false                                  Steps removed                 :0
  Timescale                             :PTP                                   Offset scaled                    :0xffff
  Time traceable                     :false                                  Frequency traceable       :false
  Loss announce                    :false                                  Loss sync                         :false
  Loss follow_up                    :false                                  Loss resp                         :false
  Sync uncertain                     :false   PTSF unusable      :false                      
  Detect asymmetry(ns):0    
                           
  Receive packet statistics
  ------------------------------------------------------------------------------
  Signaling                              :0                                         Announce                           :0
  Sync                                       :46297                               Delay_resp                         :4776
  follow_up                              :0
  Send packet statistics
  ------------------------------------------------------------------------------
  Signaling                              :0                                         Delay_req                          :4839
  Discard packet statistics
  ------------------------------------------------------------------------------
  Signaling                              :0                                        Announce                            :0
  Sync                                       :0                                       Delay_resp                          :0
  follow_up                              :0
  **************************server1 information end*****************************
  **************************server2 information begin***************************
  **************************server2 information end*****************************
# The display ptp-adaptive server command displays the following information on the client.
<HUAWEI> system-view
[~HUAWEI] display ptp-adaptive server 1
  **************************server1 information begin***************************
  Server id                               :1                                         Ip address                         :10.1.1.1/24
  Grand clock id                     :704433fffe297564          Time source                      :0x10
  Parent clock id                    :504123fffe293344           Parent portnumber          :1
  Priority1                                :128                                     Priority2                              :128
  Clock class                         :84                                        Clock accuracy                 :0x22
  Two-step flag                     :false                                    Steps removed                 :0
  Timescale                          :PTP                                      Offset scaled                     :0xffff
  Time traceable                  :false                                     Frequency traceable       :false
  Loss announce                 :false                                    Loss sync                          :false
  Loss follow_up                  :false                                    Loss resp                          :false
  Sync uncertain                   :false                                    
  Receive packet statistics
  ------------------------------------------------------------------------------
  Signaling                              :0                                         Announce                   :0
  Sync                                       :46297                               Delay_resp                 :4776
  follow_up                              :0
  Send packet statistics
  ------------------------------------------------------------------------------
  Signaling                               :0                                        Delay_req                  :4839
  Discard packet statistics
  ------------------------------------------------------------------------------
  Signaling                               :0                                        Announce                   :0
  Sync                                        :0                                       Delay_resp                 :0
  follow_up                               :0
  **************************server1 information end*****************************
Table 1 Description of the display ptp-adaptive command output
Item Description
Device type

Current working mode of a device.

Ptp adaptive state

1588 ACR status.

Sync interval

Interval at which Sync messages are sent.

Sync duration

Lifetime of Sync packets.

Sync mode

Device synchronization mode.

Frequency: frequency synchronization.

Time: time synchronization.

Sync

Interval at which Sync packets are sent, which the server negotiates with the client.

Sync uncertain

Unstable time synchronization flag.

Current state

Current master/slave status of a device.

Current trace source

Current synchronization source. The value can be server1 or server2.

Packet dscp

QoS scheduling priority (DSCP priority) of 1588 packets.

Domain value

Value.

Local ip

Priority 1 value of a clock source.

Profile

frequency: indicates that the ITUT-G.8265.1 protocol is supported.

time: indicates that the ITUT-G.8275.2 protocol is supported.

none: indicates partial support.

Server board

Slot ID of the interface board that processes 1588v2 packets on the server.

Server id

Server ID.

VPN

Name of a VPN instanced bound to the interface to which the local IP address is assigned to.

Client board

Priority 2 value of a clock source.

Client info

Client list.

Client id

Client ID.

Client number

Number of master-only-vport clients.

ID

-

Ip address

IP address of a clock server.

Ip address

IP address of a client.

Ip Address

Client IP address.

Ip address

IP address of the clock server.

Clock id

Client clock ID.

Clock ID

Client clock ID.

Clock class

Class of a clock source.

Clock accuracy

Clock source accuracy.

Mode

Frequency recovery mode.

none.

One-way.

Two-way.

Announce receipt timeout

Number of timeout times for announce packets receiving.

Announce interval

Interval at which Announce packets are sent.

Announce duration

Lifetime of Announce packets.

Announce

Interval at which Announce packets are sent, which the server negotiates with the client.

Delay_resp interval

Interval at which Delay_Resp packets are sent.

Delay_resp duration

Lifetime of Delay_Resp packets.

Delay_resp

Interval at which Delay_Resp packets are sent, which the server negotiates with the client.

Signaling

Number of Signaling packets.

Delay_req

Count of Delay_req packets.

Send Packet Statistics

Count of sent 1588 packets.

Discard Packet Statistics

Count of discarded 1588 packets.

One-way or two-way

Time source attribute value of the clock source.

Hop-by-hop mode

Configuring 1588 ATR Client in Hop-by-Hop Mode.

BMCA run info

1588 ACR/ATR best master clock source selection information.

Time performance statistics(ns)

Timestamp statistics.

Time source

Time source attribute value of the clock source.

Time traceable

Traceable flag of the clock source's time.

Realtime(T2-T1)

Realtime value of t2 minus t1.

Max(T2-T1)

Maximum value of t2 minus t1.

Min(T2-T1)

Minimum value of t2 minus t1.

Remote server info

Remote clock server list.

Negotiate state

Status of the negotiation between the client and the server. The value can be init, success, or error.

Pri1

BMCA source selection attribute: priority 1.

Class

Clock class which is used to select the master BMC.

Accuracy

Time accuracy which is used to select the master BMC.

Pri2

Priority 2 which is used to select the master BMC.

SSM

After the frequency profile is enabled, the SSM level is converted from the class. (for BMCA clock source selection).

Priority

The value is fixed at 1 for server 1 and 2 for server 2 (for BMCA clock source selection).

PTSF

Packet timing signal fail status:

PTSF unusable

PTSF use status.

Grand clock id

ID of the master clock source of the clock server.

Parent clock id

Clock ID of the server.

Parent portnumber

Port number of the clock server.

Priority1

Priority 1 value of a clock source.

Priority2

Priority 2 value of a clock source.

Two-step flag

Two-step flag in a Sync packet of the clock source.

Steps removed

Number of hops of the clock source.

Timescale

Clock source timescale.

Offset scaled

Clock source accuracy.

Frequency traceable

Traceable flag of the clock source's frequency.

Loss announce

Announce packet loss flag.

Loss sync

Loss flag of sync packets.

Loss follow_up

Follow_up packet loss flag.

Loss resp

resp packet loss flag.

Detect asymmetry(ns)

Measured asymmetry value.

Server1

Clock server 1.

Server2

Clock server 2.

Recv Packet Statistics

Count of received 1588 packets.

Vport list

Virtual port information table.

Port state

Port status.

Master-only-vport list

master-only-vport list.

Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
Next topic >