display qos hard-pipe ability

Function

The display qos hard-pipe ability command displays the IP hard pipe mode supported on interfaces.

This command is supported only on the NetEngine 8000 F1A.

Format

display qos hard-pipe ability [ interface { interface-name | interface-type interface-number } ]

Parameters

Parameter	Description	Value
interface interface-type	Specifies the type of an interface.	-
interface interface-number	Specifies the number of an interface.	-
interface interface-name	Specifies the name of an interface.	The value is a string of 1 to 63 characters.

Parameter

Description

Value

interface interface-type

Specifies the type of an interface.

interface interface-number

Specifies the number of an interface.

interface interface-name

Specifies the name of an interface.

The value is a string of 1 to 63 characters.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
qos	read

Usage Guidelines

Usage Scenario

To view the IP hard pipe mode supported on an interface, run the display qos hard-pipe ability command.

Precautions

Only the NetEngine 8000-F1A supports this command.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the hard pipe mode supported on all interfaces.

<HUAWEI> display qos hard-pipe ability
 E   : The port support exclusive-mode hard pipe.
 S   : The port support share-mode hard pipe.
 N   : None hard-pipe ability.
 U   : Unknown hard-pipe ability.
 M   : The port need split member interface.
 Note: Only ethernet physical port and Eth-trunk can support hard pipe.
 Interface                            Ability
------------------------------------------------------------------------------
 Eth-Trunk1                           U
 Eth-Trunk2                           S
 Eth-Trunk3                           S
 Eth-Trunk4                           U
 Eth-Trunk5                           U
 Eth-Trunk6                           U
 Eth-Trunk7                           U

**Table 1** Description of the **display qos hard-pipe ability** command output
Item	Description
Interface	Interface on which the hard pipe function is configured.
Ability	The hard pipe mode can be one of the following: E: indicates the exclusive mode. S: indicates the shared mode. N: indicates no hard pipe capability. U: indicates unknown hard pipe capability. U is displayed when an Eth-Trunk has no member interfaces. You can configure the shared mode in this case. Once the shared mode is configured, the system checks whether an interface has the hard pipe capability before adding it to the Eth-Trunk. If the interface has no hard pipe capability, the system does not add the interface to the Eth-Trunk. M: indicates that the member interfaces supporting hard pipe must be separated from those not supporting hard pipe. If an Eth-Trunk interface has both member interfaces supporting hard pipe and not supporting hard pipe, the Eth-Trunk member interfaces must be separated.