display qos link-adjustment configuration

Function

The display qos link-adjustment configuration command displays the configuration of last-mile QoS on an interface.

This command is supported only on the NetEngine 8000 F1A.

Format

display qos link-adjustment configuration interface { interface-name | interface-type interface-number }

Parameters

Parameter	Description	Value
interface interface-type	Specifies the interface type.	-
interface interface-number	Specifies the interface number.	The value is a string of 1 to 32 characters.
interface interface-name	Specifies the interface name.	The value is a string of 1 to 32 characters.

Parameter

Description

Value

interface interface-type

Specifies the interface type.

interface interface-number

Specifies the interface number.

The value is a string of 1 to 32 characters.

interface interface-name

Specifies the interface name.

The value is a string of 1 to 32 characters.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
qos	read

Usage Guidelines

Usage Scenario

This command is used to display the following configuration of last-mile QoS on an interface:

Information indicating whether the Layer 2 header is neglected when CAR is implemented
Mode of last-mile QoS
Packet adjustment value on the remote link

Precautions

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the configuration of last-mile QoS on an interface.

<HUAWEI> display qos link-adjustment configuration interface gigabitethernet0/1/0
Qos link-adjustment configuration information show :
GigabitEthernet0/1/0:
 Link-layer(1): exclude
 Shaping-mode: cell 
 Adjust-value(Remote): 0

**Table 1** Description of the **display qos link-adjustment configuration** command output
Item	Description
Shaping-mode	Mode of last-mile QoS. cell: indicates the cell mode. frame: indicates the Frame mode. By default, a GE interface works in Frame mode.
Adjust-value(Remote)	Packet adjustment value on the remote link.
Link-layer(1)	Information indicating whether the Layer 2 header is neglected when CAR is implemented. exclude: indicates that CAR and packet statistic collection are implemented only for Layer 3 packets. include: indicates that CAR and packet statistic collection are implemented for Layers 2 and 3 packets.