The display radius-client configuration command displays the configurations of all RADIUS clients.
This command is supported only on the NetEngine 8000 F1A.
Usage Scenario
To view the configurations of all RADIUS clients, including the IP addresses of RADIUS clients, VPN instances to which RADIUS clients belong, and corresponding RADIUS server group names, run the display radius-client configuration command. The command output helps locate faults.
Precautions
In VS mode, this command is supported only by the admin VS.
The actual command output varies according to the device. The command output here is only an example.
<HUAWEI> display radius-client configuration
Radius-client packet dscp value: 20
-----------------------------------------------------------------------------
IP-Address Mask VPN-instance Group
Domain-authorization Roam-domain Trigger-web
-----------------------------------------------------------------------------
1.1.1.1 255.255.255.0 -- zxc
NO -- ACCT_TRIGGER
-----------------------------------------------------------------------------
1 Radius client(s) in total
Item | Description |
---|---|
Radius-client packet dscp value | DSCP value of a RADIUS client's packets, not displayed if the undo radius-client packet dscp command has been run. |
IP-Address | IP address of a RADIUS client. |
Mask | IP address mask of a RADIUS client. |
VPN-instance | VPN instance to which a RADIUS client belongs. |
Group | Name of the RADIUS server group corresponding to a RADIUS client. |
Domain-authorization | Whether a new domain is delivered. |
Roam-domain | Name of a roaming domain. |
Trigger-web | Mechanism for triggering web re-authentication. |