display radius-server accounting-stop-packet

Function

The display radius-server accounting-stop-packet command displays information about Accounting Stop packets on the RADIUS server.

This command is supported only on the NetEngine 8000 F1A.

Format

display radius-server accounting-stop-packet { template-name | ip ip-address }

Parameters

Parameter	Description	Value
template-name	Specifies the name of a RADIUS server template.	The name is a string of 1 to 32 characters.
ip ip-address	Specifies an IP address, in the dotted decimal format.	The value is in dotted decimal notation.

Parameter

Description

Value

template-name

Specifies the name of a RADIUS server template.

The name is a string of 1 to 32 characters.

ip ip-address

Specifies an IP address, in the dotted decimal format.

The value is in dotted decimal notation.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
radius	read

Usage Guidelines

Usage Scenario

When checking configurations or troubleshooting RADIUS, you can run the display radius-server accounting-stop-packet command to view information about Accounting Stop packets on the RADIUS server.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# View information about the Accounting Stop packets on the RADIUS server named aa.

<HUAWEI> display radius-server accounting-stop-packet aa
  Accounting-stop-packet-number = 10

**Table 1** Description of the **display radius-server accounting-stop-packet** command output
Item	Description
Accounting-stop-packet-number	Accounting stop packet number.