display said-node

Function

The display said-node brief command displays brief SAID node information.

Format

display said-node status slot slot-id brief

display said-node status brief

Parameters

Parameter	Description	Value
brief	Indicates brief information about a single SAID node.	-
status	Indicates the status of a single SAID node.	-
slot slot-id	Specifies a slot ID. The value varies according to router hardware.	The value is a string of 1 to 16 case-sensitive characters, spaces not supported.

Parameter

Description

Value

brief

Indicates brief information about a single SAID node.

status

Indicates the status of a single SAID node.

slot slot-id

Specifies a slot ID. The value varies according to router hardware.

The value is a string of 1 to 16 case-sensitive characters, spaces not supported.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
forwarding	read

Usage Guidelines

Usage Scenario

To view the status of SAID nodes, run the display said-node brief command. The command output facilitates problem analysis and fault locating.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display brief information about SAID nodes on the board in slot 1.

<HUAWEI> display said-node status slot 1 brief
--------------------------------------------------------------------------------------------------------------------------
SAID-ID    NAME            TYPE        CYCLE(s)    STATUS           OPERATE    RECOVERCNT LASTRECOVERTIME                 
--------------------------------------------------------------------------------------------------------------------------
2          PING            common      300         init             Enable     0          00-00-00 00:00:00               
4          TRAFFIC_FALL    common      60          detecting        Enable     0          00-00-00 00:00:00               
8          AAA             common      600         init             Enable     0          00-00-00 00:00:00               
25         RESET_BOARD     common      10          init             Enable     1          2019-08-30 09:29:52

# Display brief information about SAID nodes .

<HUAWEI> display said-node status brief
--------------------------------------------------------------------------------------------------------------------------
SAID-ID    NAME            TYPE        CYCLE(s)    STATUS           OPERATE    RECOVERCNT LASTRECOVERTIME                 
--------------------------------------------------------------------------------------------------------------------------
2          PING            common      300         init             Enable     0          00-00-00 00:00:00               
4          TRAFFIC_FALL    common      60          detecting        Enable     0          00-00-00 00:00:00               
8          AAA             common      600         init             Enable     0          00-00-00 00:00:00               
25         RESET_BOARD     common      10          init             Enable     1          2019-08-30 09:29:52

# Display brief information about SAID nodes on the control boards, include OMU and MNG.

<HUAWEI> display said-node status brief


 ----------------------------------------------------------------------
 Up-Group : 1
 ----------------------------------------------------------------------
------------------------------------------------------------------------------
SAID-ID    NAME            TYPE        CYCLE(s)    STATUS           OPERATE   
------------------------------------------------------------------------------
8          AAA             common      600         init             Enable    
------------------------------------------------------------------------------

**Table 1** Description of the **display said-node** command output
Item	Description
SAID-ID	ID of a SAID node.
NAME	Name of a SAID node.
TYPE	Type of a SAID node.
CYCLE(s)	Detection interval of a SAID node.
STATUS	Current detection status of a SAID node.
OPERATE	Whether a SAID node is enabled: Enable: The SAID node is enabled. Disable: The SAID node is disabled.
RECOVERCNT	Number of said node restores.
LASTRECOVERTIME	The last recovery time.