display single-nexthop bgp fast-refresh state

Format

display single-nexthop bgp fast-refresh state

None

System view

2: Configuration level

Task Name	Operations
forwarding	read

Usage Scenario

This command allows you to learn whether fast refreshing of routes with single next hops is enabled.

In VS mode, this command is supported only by the admin VS.

The actual command output varies according to the device. The command output here is only an example.

# Check whether fast refreshing of routes with single next hops is enabled.

<HUAWEI> system-view
[~HUAWEI] display single-nexthop bgp fast-refresh state
single-nexthop bgp fast-refresh state : enable

**Table 1** Description of the **display single-nexthop bgp fast-refresh state** command output
Item	Description
state	single-nexthop bgp fast-refresh state.