display static-user configuration interface-list

Function

The display static-user configuration interface-list command displays information about a specified interface list of static users or all interface lists of static users.

This command is supported only on the NetEngine 8000 F1A.

Format

display static-user configuration interface-list [ list-name list-name ]

Parameters

Parameter	Description	Value
list-name list-name	Specifies the name of an interface list.	The value is a string of 1 to 32 case-insensitive characters.

Parameter

Description

Value

list-name list-name

Specifies the name of an interface list.

The value is a string of 1 to 32 case-insensitive characters.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
bras-control	read

Usage Guidelines

Usage Scenario

To locate faults or view information about a specified interface list of static users when the static users fail to go online through interfaces bound to the interface list, run the display static-user configuration interface-list command. If list-name is not specified, brief information about all interface lists of static users is displayed.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display detailed information about the interface list of static users named test.

<HUAWEI> display static-user configuration interface-list list-name test
  -----------------------------------------------------------------
   ID                :2
   List name        :test
   Bind user        :2
   Total interface   :4
   Interface member:    
     Eth-Trunk63              
     GigabitEthernet0/1/1.1   
     GigabitEthernet0/1/3.2   
     GigabitEthernet0/1/2.1   
  ----------------------------------------------------------------

# Display brief information about all interface lists of static users.

<HUAWEI> display static-user configuration interface-list
  -----------------------------------------------------------------
   ID             ListName    
  -----------------------------------------------------------------
   1               123      
   2               test
   3               lj       
  -----------------------------------------------------------------
  Total 3 interface-list is configured

**Table 1** Description of the **display static-user configuration interface-list** command output
Item	Description
ID	ID of an interface list.
List name	Name of an interface list.
Bind user	Number of static users bound to an interface list.
Total interface	Number of interfaces bound to an interface list.
Interface member	Information about interfaces bound to an interface list.
ListName	Name of an interface list.