display sztp status

Function

The display sztp status command displays information about SZTP status.

This command is supported only on the NetEngine 8000 F1A.

Format

display sztp status

Parameters

None

Views

All views

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
ztp	read

Usage Guidelines

Usage Scenario

Before configuring the SZTP function, you can run the display sztp status command to view the SZTP status of the system.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the SZTP status of the current system.

<HUAWEI> display sztp status
------------------------------------------------------------------------------------
Slot  Config-status  DevID-cert   SZTP-status  Previous-cfg-file
------------------------------------------------------------------------------------
1    enable        enable      enable       None
------------------------------------------------------------------------------------

**Table 1** Description of the **display sztp status** command output
Item	Description
Slot	Slot number of the main control board.
Config-status	The status of the configured sztp: enable. disable.
DevID-cert	DevID certificate status: enable. disable.
SZTP-status	SZTP status: enable. disable.
Previous-cfg-file	Pre-configuration file. If a pre-configuration file is set, the file name is displayed. Otherwise, None is displayed.