display tunnel active-info

Function

The display tunnel active-info command displays information about an MPLS TE LSP over which traffic is forwarded.

display tunnel active-info interface { interface-name | interface-type interface-number } slot slot-number

Parameter	Description	Value
interface-type	Specifies the type of an interface.	The value is the Enumerated type. It can only be Tunnel.
interface-number	Specifies the number of an interface.	-
slot slot-number	Specifies a slot ID.	The value is a string of 0 to 16 case-sensitive characters, spaces not supported.
interface interface-name	Specifies the name of a tunnel.	The value is a string of 1 to 255 characters.

All views

1: Monitoring level

Task Name	Operations
mpls-base	read

Usage Scenario

To view the MPLS TE LSP over which traffic is forwarded, run the display tunnel active-info command.

The actual command output varies according to the device. The command output here is only an example.

# Display information about the MPLS TE LSP over which traffic is forwarded.

<HUAWEI> display tunnel active-info interface Tunnel 0 slot 1
Active path :Ordinary
TunnelID :0x4008007
OutIfInterface :GigabitEthernet0/1/0

**Table 1** Description of the **display tunnel active-info** command output
Item	Description
Active path	Type of an MPLS TE LSP over which traffic is forwarded: Main. Mbb. Ordinary. BestEffort. Mbb Frr. Frr. Hsb.
TunnelID	Tunnel ID.
OutIfInterface	Tunnel outbound interface name.