display user-vlan dynamic

Function

The display user-vlan dynamic interface command displays information about VLANs through which users go online.

This command is supported only on the NetEngine 8000 F1A.

Format

display user-vlan dynamic interface { interface-type interface-number | interface-name }

Parameters

Parameter	Description	Value
interface-type	Specifies an interface type.	-
interface-number	Specifies an interface number.	-
interface-name	Specifies an interface name.	-

Parameter

Description

Value

interface-type

Specifies an interface type.

interface-number

Specifies an interface number.

interface-name

Specifies an interface name.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
bras-control	read

Usage Guidelines

Usage Scenario

To check information about VLANs through which users go online, run the display user-vlan dynamic interface command.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display information about five VLANs (two single-tagged VLANs and three double-tagged VLANs) on GigabitEthernet0/1/0.1 through which users go online.

<HUAWEI> display user-vlan dynamic interface GigabitEthernet0/1/0.1
pe-vlan : ce-vlan    number of online users 
-------------------------------------------------------------------- 
200  : 0              3
201  : 0              300
10   : 100            1
10   : 101            1
10   : 102            2
vlan counters : 5   Single vlan : 2  Qinq vlan: 3

# Display information about five VLANs (two single-tagged VLANs and three double-tagged VLANs) on GigabitEthernet0/1/0.1 through which users go online.

<HUAWEI> display user-vlan dynamic interface GigabitEthernet0/1/0.1
pe-vlan : ce-vlan    number of online users 
-------------------------------------------------------------------- 
200  : 0              3
201  : 0              300
10   : 100            1
10   : 101            1
10   : 102            2
vlan counters : 5   Single vlan : 2  Qinq vlan: 3

**Table 1** Description of the **display user-vlan dynamic** command output
Item	Description
pe-vlan	Outer VLAN ID of users who go online by sending double-tagged packets. If users send single-tagged packets to go online, this value is the single VLAN ID.
ce-vlan	Inner VLAN ID of users who go online by sending double-tagged packets. If users send single-tagged packets to go online, this value is 0.
number of online users	Number of online users in the VLAN.
vlan counters	Number of VLANs through which users go online.
Single vlan	Number of VLANs through which users go online by sending single-tagged packets.
Qinq vlan	Number of VLANs through which users go online by sending double-tagged packets.