display vendor-class dhcpv6

Function

The display vendor-class dhcpv6 command displays information about the vendor-class dhcpv6 configuration in the system view.

This command is supported only on the NetEngine 8000 F1A.

Format

display vendor-class dhcpv6

Parameters

None

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
ipv6pool	read

Usage Guidelines

Usage Scenario

When the terminal does not carry the vendor-class information using DHCPv6 Option16, you can run the vendor-class dhcpv6 command to configure the mapping between vendor-class and DHCPv6 option.

After the configuration is complete, you can run the display vendor-class dhcpv6 command to check the configuration.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display information about the mapping between the vendor-class attribute and a DHCPv6 option code as well as the offset value.

<HUAWEI> display vendor-class dhcpv6
Vendor-class DHCPv6:enable.
DHCPv6 option code:17.
DHCPv6 offset: 4

**Table 1** Description of the **display vendor-class dhcpv6** command output
Item	Description
Vendor-class DHCPv6	Whether a mapping between the vendor-class attribute and a DHCPv6 option code as well as the offset value are configured. enable: The mapping between the vendor-class attribute and a DHCPv6 option code as well as the offset value are configured. disable: The mapping between the vendor-class attribute and a DHCPv6 option code as well as the offset value are not configured.
DHCPv6 option code	DHCP Option code that corresponds to the vendor-class attribute. The default value is 16.
DHCPv6 offset	Offset value for the DHCPv6 option code of the vendor-class attribute. The default offset value is 0.