display web-auth-server configuration

Function

The display web-auth-server configuration command displays the configuration of the web authentication server.

This command is supported only on the NetEngine 8000 F1A.

Format

display web-auth-server configuration [ slave ]

Parameters

Parameter	Description	Value
slave	Displays memory statistics on the slave main control board.	-

Parameter

Description

Value

slave

Displays memory statistics on the slave main control board.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
portal	read

Usage Guidelines

Usage Scenario

The display web-auth-server configuration command displays the configuration of the web authentication server.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the configuration of the web authentication server.

<HUAWEI> display web-auth-server configuration
Source interface      : -
  Listening port        : 2000
  Portal                : version 1, version 2, version 3
  DSCP priority         : 32
  Include reply message : enabled 
  Web auth server       : enabled 
  User query version1   : enabled 
  User query sequence   : username  usermac  userip  useraccid
  ------------------------------------------------------------------------------
           Server  Shared-key   Port  PortFlag  NAS-IP  time  State Vpn-instance
  ------------------------------------------------------------------------------
          3.3.3.3  ******      50100   NO       NO       0     --    
  ------------------------------------------------------------------------------
  1 Web authentication server(s) in total

**Table 1** Description of the **display web-auth-server configuration** command output
Item	Description
Source interface	Indicates the interface of source address, which is used by to send message to web authentication server.
Listening port	Indicates the listening port of web authentication server.
Portal	Indicates the version of the portal protocol supported by the system.
DSCP priority	The priority of the Differentiated Services Code Point.
Include reply message	Is used to enable/disable the transparent transmission function of response messages.
Web auth server	Indicates whether web authentication is enabled: enabled. disabled.
User query version1	Whether the device is enabled to provide user information based on user MAC and IP addresses and user names and accounting IDs: enabled. disabled.
User query sequence	Indicates the user query sequence.
Server	Indicates the IP address of the web authentication server.
Shared-key	Indicates the shared key used by the device and the web authentication server.
Port	The port number for web authentication server.
PortFlag	Indicates the flag of the destination port ID which is used by to responsed packet to web authentication server. YES: Indicates the destination port ID of a Web response packet is the specified port ID. NO: Indicates the destination port ID of a Web response packet is the source port ID of the corresponding Web request packet.
NAS-IP	Sets whether the packet to the web authentication server contains the IP address of the device.
time	Indicates the detection interval of the Web authentication server, in minutes.
State	Indicates the state of the Web authentication server, in minutes.
Vpn-instance	The vpn-instance bound to the web authentication server.