The actual command output varies according to the device. The command output here is only an example.
# Display the bindings between all mVRRP6 and service VRRP6 backup groups.
<HUAWEI> display vrrp6 binding admin-vrrp6 member-vrrp
Interface: GigabitEthernet0/1/0, admin-vrrp vrid: 1, state: Master
Member-vrrp number: 2
Interface: GigabitEthernet0/1/1, vrid: 2, state: Master
Interface: GigabitEthernet0/1/2, vrid: 3, state: Master
Table 1 Description of the display vrrp6 binding admin-vrrp6 command output
Item |
Description |
admin-vrrp vrid |
ID of the mVRRP6 backup group.
|
Member-vrrp number |
Number of service VRRP6 backup groups bound to the mVRRP6 backup group.
|
Interface |
Interface on which the mVRRP6 backup group is configured.
|
state |
Status of the mVRRP6 backup group:
- Master.
- Backup.
- Initialize.
|
Interface |
Interface on which the service VRRP6 backup group is configured.
|
state |
Status of the service VRRP6 backup group:
- Master.
- Backup.
- Initialize.
|
vrid |
ID of the service VRRP6 backup group.
|