display default-parameter mpls ldp

Function

The display default-parameter mpls ldp command displays default MPLS LDP configurations.

Format

display default-parameter mpls ldp

Parameters

None

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
mpls-ldp	read

Usage Guidelines

Usage Scenario

To view default MPLS LDP configurations, run the display default-parameter mpls ldp command.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display default MPLS LDP configurations.

<HUAWEI> display default-parameter mpls ldp
LDP Default Values:                                                 
 ----------------------------------------------------------   
          Protocol version                     : V1     
          Graceful restart                     : Off    
            Neighbor liveness(sec)             : 600                                  
            FT reconnect timer(sec)            : 300
            Recovery timer(sec)                : 300                                  
          MTU signaling                        : On
          Capability-announcement              : Off
          Session Protection                   : Off
            Duration timer(sec)                : 86400
          mLDP MBB Capability                  : Off
          mLDP P2MP Capability                 : Off
          mLDP MBB Capability                  : --
          mLDP P2MP Capability                 : --
          mLDP MP2MP Capability                : Off
          mLDP Recursive                       : Off
          mLDP Frr                             : On  
          mLDP Label Withdraw Delay Timer(sec) : 2
          mLDP MBB Wait Ack Timer(sec)         : 60
          mLDP MBB Switch Delay Timer(ms)      : 100
          Entropy Label                        : Off
          mLDP Reoptimize Timer(minute)        : 30
----------------------------------------------------------

**Table 1** Description of the **display default-parameter mpls ldp** command output
Item	Description
LDP Default Values	Default values of LDP protocol.
Protocol version	LDP version number.
Graceful restart	Whether LDP GR is enabled. The default value is "Off", indicating that LDP GR is disabled.
Neighbor liveness(sec)	Default value of the LDP Neighbor Liveness timer, in seconds.
FT reconnect timer(sec)	Default value of the LDP session Reconnect timer, in seconds.
Recovery timer(sec)	Default value of the LDP LSP Recovery timer, in seconds.
MTU signaling	Default MTU TLV function status, which is On.
mLDP MBB Capability	Whether the mLDP make-before-break capability is enabled. The default value is "Off", indicating that mLDP make-before-break is disabled.
mLDP P2MP Capability	Whether mLDP P2MP is enabled globally. The default value is "Off", indicating that LDP P2MP is disabled globally.
mLDP MP2MP Capability	Whether mLDP MP2MP is enabled. The default value is "Off", indicating that LDP MP2MP is disabled globally.
mLDP Recursive	Whether an mLDP P2MP LSP is established across domains.
mLDP Frr	Whether mLDP FRR is enabled.
mLDP Label Withdraw Delay Timer(sec)	Timer (in seconds) for delaying in deleting mLDP P2MP LSP labels.
mLDP MBB Wait Ack Timer(sec)	Timer (in seconds) for a downstream node to wait for an MBB Notification message sent by an upstream node.
mLDP MBB Switch Delay Timer(ms)	Timer (in ms) for delaying an MBB LSP switchover.
mLDP Reoptimize Timer(minute)	Timer (in minute) for mLDP P2MP tunnel re-optimization.
Entropy Label	LDP entropy label capability.
Capability-announcement	Whether the LDP dynamic advertisement function is enabled. The default value is "Off", indicating that this function is enabled.
Session Protection	Whether the LDP session protection is enabled.
Duration timer(sec)	Duration when LDP session protection remains effective.