display mpls te cspf tedb network-lsa
Function
The display mpls te cspf tedb network-lsa command displays information about CSPF-based TEDBs that meet specified conditions.
Example
The actual command output varies according to the device. The command output here is only an example.
# Display information about network LSAs in a TEDB.
<HUAWEI> display mpls te cspf tedb network-lsa
2021-01-29 15:48:49.344
Maximum Network LSA Supported : 1024
Current Total Network LSA Number : 4
IGP-Type: OSPF Process-ID: 1000
ID DR-Router-ID DR-Address Area DR-OSPF-Router-ID Neighbors
1 10.255.255.5 10.5.10.17 0 10.5.9.1
Neighbor: 10.255.255.10 OSPF-Router-ID: 10.4.10.18
Neighbor: 10.255.255.5 OSPF-Router-ID: 10.5.9.1
2 10.255.255.5 10.4.5.18 0 10.5.9.1
Neighbor: 10.255.255.4 OSPF-Router-ID: 10.3.4.18
Neighbor: 10.255.255.5 OSPF-Router-ID: 10.5.9.1
3 10.255.255.8 10.8.9.17 0 10.5.9.2
Neighbor: 10.255.255.9 OSPF-Router-ID: 10.3.9.18
Neighbor: 10.255.255.8 OSPF-Router-ID: 10.5.9.2
4 10.255.255.8 10.7.8.18 0 10.5.9.2
Neighbor: 10.255.255.7 OSPF-Router-ID: 10.1.7.18
Neighbor: 10.255.255.8 OSPF-Router-ID: 10.5.9.2
| Item | Description |
|---|---|
| Maximum Network LSA Supported | Maximum number of supported network LSAs. |
| Current Total Network LSA Number | Number of existing network LSAs. |
| ID | Sequence number. |
| DR-Router-ID | Designated router ID. |
| DR-Address | Interface address of the designated router. |
| Area | Area to which the router belongs. |
| DR-OSPF-Router-ID | OSPF router ID for the DR. |
| Neighbors | ID of the neighbor router. |
| IGP-Type | IGP, either OSPF or IS-IS. |
| Process-ID | IGP process ID. |
| OSPF-Router-ID | OSPF router ID of the neighbor router. |
| Neighbor | ID of the neighbor router. |