display mpls te cspf tedb overload-node

Function

The display mpls te cspf tedb overload-node command displays information about CSPF-based overload-node TEDBs that meet specified conditions on the control board.

Format

display mpls te cspf tedb overload-node

Parameters

None

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
mpls-te	read

Usage Guidelines

Usage Scenario

This command displays information about CSPF-based overload-node TEDBs that meet specified conditions.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display information about all TEDBs.

<HUAWEI> display mpls te cspf tedb overload-node
Current Total Node Number: 14
Current Total Link Number: 34
Current Total SRLG Number: 0
Id      Router-Id       IGP       Process-Id      Area             Link-Count
1       1.1.1.1         OSPF      1               0                1         
2       2.2.2.2         OSPF      1               0                3         
3       3.3.3.3         OSPF      1               0                2

**Table 1** Description of the **display mpls te cspf tedb overload-node** command output
Item	Description
Current Total Node Number	Number of existing TE nodes.
Current Total Link Number	Number of existing TE links.
Current Total SRLG Number	Number of existing SRLGs.
Id	Sequence number.
Router-Id	Router ID formatted as X.X.X.X, in dotted decimal notation.
IGP	IGP, either OSPF or IS-IS.
Process-Id	IGP process ID.
Area	Area to which a router belongs.
Link-Count	Total number of connected links with a specified IGP type and a specified process ID.