display rawlink statistics

Function

The display rawlink statistics command displays RawLink packet statistics.

Format

display rawlink statistics

Parameters

None

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
ip-stack	read

Usage Guidelines

Usage Scenario

To check statistics about RawLink packets, include the number of sent and received RawLink packets, run the display rawlink statistics command.

IS-IS packets are encapsulated into RawLink packets during transmission. If IS-IS packets are abnormally sent, run the display rawlink statistics command to check the numbers of RawLink packets sent and received by the local device to see if the network abnormality is caused by abnormal sending and receiving of RawLink packets.

Precautions

The number of packets received by the Router includes the number of forwarded packets, packets sent to the upper layer, and discarded packets.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display RawLink packet statistics.

<HUAWEI> display rawlink statistics
------------------------ Display RawLink Statistics -------------------
Received packets:
    Total: 1771645
    Input packets missing pcb cache: 1181096
Sent packets:
    Total: 125850
-----------------------------------------------------------------------

**Table 1** Description of the **display rawlink statistics** command output
Item	Description
Received packets	Received packet statistics.
Input packets missing pcb cache	Number of packets discarded because no corresponding PCB exists.
Sent packets	Sent packet statistics.
Total	Total number of received or sent packets.