display this ipv6 interface

Function

The display this ipv6 interface command displays IPv6 information on an existing interface.

Format

display this ipv6 interface

Parameters

None

Views

100ge sub-interface view, 100GE interface view, 10GE sub-interface view, 10GE interface view, 200GE sub-interface view, 25GE sub-interface view, 25GE interface view, 400GE sub-interface view, 400GE interface view, 40GE sub-interface view, 40GE interface view, 50GE sub-interface view, 50GE interface view, Eth-Trunk sub-interface view, Eth-Trunk interface view, FlexE interface view, GE optical interface view, GE sub-interface view, GE interface view, GE electrical interface view, Global VE sub-interface view, Loopback interface view, PW-VE sub-interface view, PW-VE interface view, Tunnel interface view, VBDIF interface view, VE sub-interface view, VLANIF interface view, Management interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
interface-mgr	write

Usage Guidelines

Usage Scenario

To view IPv6 information on an interface, run the display this ipv6 interface command.

Precautions

Information displayed using the display this ipv6 interface command in the current interface view is the same as the information displayed using the display ipv6 interface command.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display IPv6 information on GE 0/1/1.

<HUAWEI> system-view
[~HUAWEI] interface gigabitethernet 0/1/1
[~HUAWEI-Gigabitethernet0/1/1] display this ipv6 interface
Gigabitethernet0/1/1 current state : UP
IPv6 protocol current state : UP
IPv6 is enabled, link-local address is FE80::3ABA:1200:78A:6E02
  Global unicast address(es):
    2001:db8:1::1, subnet is 2001:db8:1::/64
  Joined group address(es):
    FF02::1:FF00:1
    FF02::1:FF8A:6E02
    FF02::2
    FF02::1
  MTU is 1500 bytes
  ND DAD is enabled, number of DAD attempts: 1
  ND reachable time is 1200000 milliseconds
  ND retransmit interval is 1000 milliseconds
  Hosts use stateless autoconfig for addresses

**Table 1** Description of the **display this ipv6 interface** command output
Item	Description
current state	Physical status of the interface. UP. DOWN. Administratively DOWN.
IPv6 protocol current state	Protocol status of the interface. UP. DOWN.
IPv6 is enabled	The IPv6 capability is configured on the interface.
link-local address	Link local address configured for that interface.
Global unicast address(es)	Global unicast address of the interface.
Joined group address(es)	All multicast addresses that have joined the interface.
MTU	Maximum transmission unit for that interface.
ND reachable time	Time period for a neighbor to keep reachable.
ND retransmit interval	Retransmission interval.
number of DAD attempts	Number of conflicting address detection times.
Hosts use stateless autoconfig for addresses	Host address obtained using stateless autoconfiguration.