display multicast routing-table static

Function

The display multicast routing-table static command displays multicast static routes.

Format

display multicast routing-table [ vpn-instance vpn-instance-name ] static [ config ] [ prefix4 { masklength | mask4 } ]

Parameters

Parameter	Description	Value
vpn-instance vpn-instance-name	Displays multicast static routes of a specified VPN instance. vpn-instance-name specifies the name of a VPN instance.	The value is a string of 1 to 31 case-sensitive characters, spaces not supported. In addition, the VPN instance name must not be _public_. When double quotation marks are used around the string, spaces are allowed in the string.
config	Displays the configuration of the multicast static routes.	-
prefix4	Displays multicast static routes of a specified multicast source address. source-address specifies a multicast source address.	The address is in dotted decimal notation.
masklength	Specifies the mask length of the multicast source address.	The value is an integer ranging from 0 to 32.
mask4	Specifies the mask of the multicast source address.	The mask is in dotted decimal notation.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
route-base	read

Usage Guidelines

Usage Scenario

Before running the display multicast routing-table static command, note the following:

If neither vpn-instance is specified, the command displays multicast static routes of the public network instance.
If config is specified, the command displays all multicast static routes, including active routes and inactive routes.
If the multicast static route configured on the local router cannot be displayed.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the configuration of static routes in the multicast routing table.

<HUAWEI> display multicast routing-table static config
Multicast Routing Table
Routes : 1

 Mroute 10.1.0.0/24,     RPF neighbor = 10.1.2.2
 Matched routing protocol = ospf, process-id = 100, Route-policy = none
 Preference = 1, Order = 1

# Display all multicast static routes to multicast source 10.10.0.0/16 in the public network instance.

<HUAWEI> display multicast routing-table static 10.10.0.0 255.255.0.0
Multicast Routing Table
Routes : 1

 Mroute 10.1.0.0/24
          Interface = GigabitEthernet0/1/0       RPF Neighbor = 10.1.2.2
          Matched routing protocol = ospf, process-id = 100, Route-policy = none
          Preference = 1, Order = 1
 Running Configuration = ip rpf-route-static 10.1.0.0 24 ospf 100 10.1.2.2 order 1

# Display the configuration of static routes in the multicast routing table.

<HUAWEI> display multicast routing-table static
Multicast Routing Table
Routes : 1

 Mroute 10.1.0.0/24
          Interface = GigabitEthernet0/1/0       RPF Neighbor = 10.1.2.2
          Matched routing protocol = ospf, process-id = 100, Route-policy = none
          Preference = 1, Order = 1
 Running Configuration = ip rpf-route-static 10.1.0.0 24 ospf 100 10.1.2.2 order 1

**Table 1** Description of the **display multicast routing-table static** command output
Item	Description
Multicast Routing Table	Multicast routing table.
Routes	Number of routes.
Mroute	Source address and mask length of a multicast route.
RPF Neighbor	Neighbor IP address through which the source address is reachable.
Matched routing protocol	Matching unicast route type.
process-id	Process ID of a routing protocol.
Route-policy	Routing policy. The source address of a route must match the routing policy.
Preference	Route priority.
Order	Order of a route.
Interface	Outbound interface of the reachable multicast source.
Running Configuration	Command line for configuring a static route.