display nqa reflector

Function

The display nqa reflector command displays information about the reflector of an NQA flow test instance.

Format

display nqa reflector [ reflectorId ]

Parameters

Parameter	Description	Value
reflectorId	Displays information about a reflector with a specific ID.	The value is an integer ranging from 1 to 65535.

Parameter

Description

Value

reflectorId

Displays information about a reflector with a specific ID.

The value is an integer ranging from 1 to 65535.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
sla	read

Usage Guidelines

Usage Scenario

After a test is carried out, to view reflector information, run the display nqa reflector command. The command output contains the ID, lifetime, MAC and IP addresses, VLAN IDs, reflector interface name, reflector status, and initiator's MAC address.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display reflector information.

<HUAWEI> display nqa reflector
The total number of reflectors is 1
Reflector 1:
  Interface                     : GE0/1/0
  IP-address                    : --
  MAC-address                   : --
  Cevid                         : --
  Pevid                         : --
  Simulate IP-address           : --
  Source-port                   : --
  Destination-port              : --
  Exchange-port                 : disable
  AgeTime(s)                    : 14400
  SurvivalTime(s)               : 13307
  Endtime                       : 2014-03-19 08:48:21
  State                         : --
  RecommendedTestMac            : 00e0-fc12-3456
  TestFlow                      : --

**Table 1** Description of the **display nqa reflector** command output
Item	Description
The total number of reflectors is 1	The total number of reflectors.
Reflector 1	Nnumber of the reflector.
Interface	Type and number of an interface on which a reflector is configured.
IP-address	Destination IP address of matching test packets.
MAC-address	Destination MAC address of matching test packets.
Cevid	Inner VLAN ID of matching test packets. The Cevid field indicates a VLAN ID in a native Ethernet scenario.
Pevid	Outer VLAN ID of matching test packets.
Source-port	Source port number.
Destination-port	Destination port number.
AgeTime(s)	Aging time (in seconds) of the reflector.
SurvivalTime(s)	Remaining time (in seconds) before the reflector ages.
Endtime	End time (in seconds) of the reflector.
State	Reflector status.
RecommendedTestMac	Recommended MAC address used in the test.
TestFlow	NQA test flow.
Exchange-port	Status of exchanging UDP source and destination port numbers: disable. enable.