Usage Scenario
Before running the reset smart-link flush command to clear Flush packet statistics, run the display smart-link flush command to view information about received Flush packets. The information helps you learn about the primary and secondary link status and locate faults on interfaces.
Prerequisites
A Smart Link group on a downstream device has been enabled to send Flush packets using flush send command, and an interface on an upstream device has been enabled to receive Flush packets using the smart-link flush receive command.
Follow-up Procedure
Run the reset smart-link flush command to clear Flush packet statistics.
The actual command output varies according to the device. The command output here is only an example.
<HUAWEI> display smart-link flush Receive flush packets count: 1191 Receive last flush interface: GigabitEthernet0/1/1 Receive last flush packet time: 02:42:37 UTC-03:00 DST 2013/01/27 Receive last flush packet source MAC: 00e0-fc12-3456 Receive last flush packet control VLAN ID: 311
Item | Description |
---|---|
Receive flush packets count | Number of received Flush packets. |
Receive last flush interface | Interface that received the latest Flush packet. |
Receive last flush packet time | Time and data that the latest Flush packet was received. The format is HH:MM:SS UTC+HH:MM DST YYYY/MM/DD. |
Receive last flush packet source MAC | Source MAC address of the latest received Flush packet. |
Receive last flush packet control VLAN ID | Control VLAN ID of the latest received Flush packet. |