display mpls sr-te-lsp (All views)

Function

The display mpls sr-te-lsp command displays information about SR-MPLS TE LSPs.

Format

display mpls sr-te-lsp [ lsp-id ingress-lsrid session-id lspid ] [ verbose ]

Parameters

Parameter	Description	Value
lsp-id	Specifies the LSP ID.	-
ingress-lsrid	Specifies the ingress LSR ID.	The value is in dotted decimal notation.
session-id	Specifies the session ID.	The value is an integer ranging from 0 to 65535.
lspid	Specifies the LSP ID.	The value is an integer ranging from 0 to 65535.
verbose	Displays detailed information about SR-MPLS TE LSPs.	-

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
mpls-te	read

Usage Guidelines

Usage Scenario

To view detailed information about a specific or all SR-MPLS TE LSPs, run the display mpls sr-te-lsp slave command. The command output helps diagnose faults.

If no optional parameter is configured in this command, detailed information about all SR-MPLS TE LSPs in the Up state is displayed.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display detailed information about all SR-MPLS TE LSPs in the Up state.

<HUAWEI> display mpls sr-te-lsp verbose
Total lsp number: 1                                                             
----------------------------------------------------------------------          
                 LSP Information: SR-TE LSP                                     
----------------------------------------------------------------------          
  No                  :  1                                                      
  SessionID           :  4                                                      
  IngressLsrID        :  1.1.1.1                                                
  LocalLspID          :  86                                                     
  Tunnel-Interface    :  Tunnel4                                                
  Fec                 :  2.2.2.2/32                                             
  Out-Label           :  284689                                                 
  LspIndex            :  450                                                    
  Token               :  ----------                                             
  Mpls-Mtu            :  0                                                      
  LspAge              :  60 sec

**Table 1** Description of the **display mpls sr-te-lsp (All views)** command output
Item	Description
Total lsp number	Number of SR-MPLS TE LSPs.
LSP Information	LSP Information.
No	Number of LSPs.
SessionID	SR-MPLS TE session ID.
IngressLsrID	LSR ID of the ingress.
LocalLspID	Local LSP ID.
Tunnel-Interface	Tunnel name.
Fec	FEC.
Out-Label	Outgoing label value.
LspIndex	LSP index.
Token	Token value.
Mpls-Mtu	MPLS maximum transmission unit (MTU), in bytes.
LspAge	Time (in seconds) elapsed since an LSP was established.