dns-server(IPv6 address pool view)

Function

The dns-server command binds a DNS server to an IPv6 address pool by an IPv6 address.

The undo dns-server command deletes the binding between a DNS server and an IPv6 address pool.

By default, a DNS server is not bound to an IPv6 address pool by an IPv6 address.

This command is supported only on the NetEngine 8000 F1A.

Format

dns-server ipv6-address &<1-2>

undo dns-server ipv6-address &<1-2>

Parameters

Parameter	Description	Value
ipv6-address	Specifies the IPv6 address of a DNS server.	The address is a 32-digit hexadecimal number.

Parameter

Description

Value

ipv6-address

Specifies the IPv6 address of a DNS server.

The address is a 32-digit hexadecimal number.

Views

IPv6 address pool view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ipv6pool	write

Usage Guidelines

Usage Scenario

Through this command specifies a DNS server for users allocated IP addresses in a specified address pool.

A maximum of two DNS servers can be bound to an IPv6 address pool by IPv6 addresses.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Bind the DNS server whose IPv6 address is 2001:db8:1::1 to an IPv6 address pool named pool1.

<HUAWEI> system-view
[~HUAWEI] ipv6 pool pool1 bas local
Info: Create an ipv6 pool.
[*HUAWEI-ipv6-pool-pool1] commit
[~HUAWEI-ipv6-pool-pool1] dns-server 2001:db8:1::1