domain-location

Function

The domain-location command configures the domain name to be located before or after the delimiter to facilitate system parsing.

The undo domain-location command restores the default domain location.

By default, the domain name is located after the delimiter.

Format

domain-location domainPosition

undo domain-location

Parameters

Parameter	Description	Value
domainPosition	Specifies the type of parsing the domain name.	The value is an enumerated type and can be: after-delimiter:Indicates that the domain name is located after the delimiter. before-delimiter:Indicates that the domain name is located before the delimiter.

Parameter

Description

Value

domainPosition

Specifies the type of parsing the domain name.

The value is an enumerated type and can be:

after-delimiter:Indicates that the domain name is located after the delimiter.
before-delimiter:Indicates that the domain name is located before the delimiter.

Views

AAA view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
aaa	write

Usage Guidelines

Usage Scenario

By default, a user uses user name@domain name to log in to a device. To configure a user to use domain name@user name to log in, run the domain-location command to configure the domain name to be located before the delimiter. You can configure a delimiter as required. For details, see domain-name-delimiter.

Precautions

The newly configured domain-location command does not apply to the currently online users in the domain but applies only to the subsequent online users.

Example

# Configure the domain name to be located before the delimiter.

<HUAWEI> system-view
[~HUAWEI] aaa
[~HUAWEI-aaa] domain-location before-delimiter