display vxlan cu-peer

Function

The display vxlan cu-peer command displays the peer information of VXLAN tunnels in a CU separation scenario.

Format

display vxlan cu-peer

Parameters

None

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
nvo3	read

Usage Guidelines

To check the peer information of VXLAN tunnels in a CU separation scenario, run the display vxlan cu-peer command. The command output helps you determine whether VXLAN tunnels are created successfully.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the peer information of VXLAN tunnels.

<HUAWEI> display vxlan cu-peer
Number of peers : 1
Vni ID    Source                  Destination            Type      Out Vni ID     Nqa State     Pkt Loss Ratio
--------------------------------------------------------------------------------------------------------------
1         1.1.1.1                 2.2.2.2                static    1              up            66%

**Table 1** Description of the **display vxlan cu-peer** command output
Item	Description
Number of peers	Number of peers of a VXLAN tunnel.
Vni ID	VNI ID of a VXLAN.
Source	Source IP address of a VXLAN tunnel.
Destination	Destination IP address of a VXLAN tunnel.
Type	VXLAN tunnel type, which can only be static in CU separation scenarios.
Out Vni ID	Outbound VNI ID identifying a segmented VXLAN.
Nqa State	NQA State.
Pkt Loss Ratio	Packet Loss Ratio.