dtls policy

Function

The dtls policy command creates an DTLS policy and displays the Datagram Transport Level Security (DTLS) policy view. If the DTLS policy to be created already exists, running this command presents you the view of the DTLS policy.

The undo dtls policy command deletes an DTLS policy.

By default, no DTLS policies are created.

Format

dtls policy policyName

undo dtls policy policyName

Parameters

Parameter	Description	Value
policyName	Specifies the name of an SSL policy.	The value is a string of 1 to 23 case-insensitive characters, containing letters, digits, and underscores (_), spaces not supported.

Parameter

Description

Value

policyName

Specifies the name of an SSL policy.

The value is a string of 1 to 23 case-insensitive characters, containing letters, digits, and underscores (_), spaces not supported.

Views

System view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
ssl	write

Usage Guidelines

Usage Scenario

You can run this command to enter the DTLS policy view and configure DTLS services.

Precautions

A maximum of four DTLS policies can be configured.

Example

# Create an DTLS policy named policy1 and enter the view of the DTLS policy.

<HUAWEI> system-view
[~HUAWEI] dtls policy policy1