intelligent-anomaly-identify enable

Function

The intelligent-anomaly-identify enable command enables intelligent anomaly identification.

By default, intelligent anomaly identification is not enabled.

Format

intelligent-anomaly-identify enable

undo intelligent-anomaly-identify enable

Parameters

None

Views

EAI view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
eai	write

Usage Guidelines

Usage Scenario

To check whether a device is abnormal, run this command to enable intelligent anomaly identification. After this command is run, the system will use algorithms to analyze whether KPI indicators are abnormal and generate anomaly events. The anomaly events can be reported to the controller through telemetry.

Precautions

If you run this command to configure intelligent exception identification on an unsupported chassis, a message is displayed indicating that the function is not supported.
Intelligent exception identification is supported only on devices equipped with main control boards with a memory capacity of 4 GB or higher. If you run this command to configure intelligent exception identification on an unsupported device, a message is displayed indicating that the function is not supported.
If you run this command to configure intelligent exception identification on a device whose main control boards do not meet CPU performance requirements, a message is displayed indicating that the function is not supported.

Example

# Enable intelligent anomaly identification.

<HUAWEI> system-view
[~HUAWEI] eai
[~HUAWEI-eai] intelligent-anomaly-identify enable