enable (NetStream aggregation view)

Function

The enable command enables a NetStream aggregation mode.

The undo enable command disables a NetStream aggregation mode.

By default, no NetStream aggregation mode is enabled.

Format

enable

undo enable

Parameters

None

Views

IPv6 NetStream aggregation view, NetStream aggregation view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
netstream	write

Usage Guidelines

Usage Scenario

Original flow statistics are used to analyze sampled packets. Various types of original flows sharing characteristics can be aggregated into an aggregated flow. An aggregated flow has less data volume and shared characteristics, which meets requirements of feature-based statistics collection.

After creating an IPv4 NetStream aggregation mode using the ip netstream aggregation command in the system view, you must run the enable command in the aggregation view to make the aggregation mode take effect.

Example

# Enable the NetStream AS aggregation mode.

<HUAWEI> system-view
[~HUAWEI] ip netstream aggregation as
[*HUAWEI-aggregation-as] enable