snmp-agent set-cache enable

Function

The snmp-agent set-cache enable command enables the SET Response message caching function.

The undo snmp-agent set-cache enable command disables the SET Response message caching function.

By default, the SET Response message caching function is disabled.

Format

snmp-agent set-cache enable

undo snmp-agent set-cache enable

Parameters

None

Views

System view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
snmp	write

Usage Guidelines

If you perform a SET operation using an NMS to set parameters of a device, a device sends SET Response messages to the NMS. SET Response messages may be dropped if the number of SNMP messages on a network exceeds the processing capability of the NMS. To enable the SET Response message caching function to minimize the loss of SET Response messages, run the snmp-agent set-cache enable command.

Example

# Enable the SET Response message caching function.

<HUAWEI> system-view
[~HUAWEI] snmp-agent set-cache enable