mldp-p2mp-tunnel

Function

The mldp-p2mp-tunnel command enables a node to create an mLDP P2MP tunnel.

The undo mldp-p2mp-tunnel command enables a node to tear down an mLDP P2MP tunnel.

No mLDP P2MP tunnel is established by default.

Format

mldp-p2mp-tunnel tunnel-name

undo mldp-p2mp-tunnel tunnel-name

Parameters

Parameter	Description	Value
tunnel-name	Specifies the tunnel name.	The value is a string of 1 to 31 case-sensitive characters. It cannot contain spaces. When double quotation marks are used around the string, spaces are allowed in the string.

Parameter

Description

Value

tunnel-name

Specifies the tunnel name.

The value is a string of 1 to 31 case-sensitive characters. It cannot contain spaces. When double quotation marks are used around the string, spaces are allowed in the string.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-ldp	write

Usage Guidelines

Usage Scenario

To create an mLDP P2MP tunnel, run the mldp-p2mp-tunnel command on the ingress.

Follow-up Procedure

Run the root-ip command to bind a specified mLDP P2MP LSP to the mLDP P2MP tunnel.

Example

# Create an mLDP P2MP tunnel named test.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] quit
[*HUAWEI] mpls ldp
[*HUAWEI-mpls-ldp] quit
[*HUAWEI] mldp-p2mp-tunnel test
[*HUAWEI-mldp-p2mp-tunnel-test]