end-group

Function

The end-group command concludes the configuration of a QPPB configuration group, exits the QPPB configuration group view, and returns to the system view.

By default, the end-group command is not run.

Format

end-group

Parameters

None

Views

QPPB configuration group view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
route-base	write

Usage Guidelines

Usage Scenario

By default, routes do not carry the QoS attribute. Configuring QPPB helps collect traffic statistics. To conclude the configuration of a QPPB configuration group, exit the QPPB configuration group view, and return to the system view, run the end-group command.

Prerequisites

Apply clauses have been configured for a QPPB configuration group.

Example

# Configure a QPPB configuration group named qppb1.

<HUAWEI> system
[~HUAWEI] xpl route-flow-group qppb1
[~HUAWEI-xpl-rfg] apply ip-precedence 2,
[~HUAWEI-xpl-rfg] apply qos-local-id 10,
[~HUAWEI-xpl-rfg] apply traffic-index 1
[~HUAWEI-xpl-rfg] end-group