entropy-label-capability enable

Function

The entropy-label-capability enable command enables the entropy label capability on the egress.

The undo entropy-label-capability enable command disables the entropy label capability on the egress.

By default, the entropy label capability is disabled on the egress.

Format
Parameters
Views
Default Level
Task Name and Operations
Usage Guidelines
Example

Format

entropy-label-capability enable

undo entropy-label-capability enable

Parameters

None

Views

MPLS view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-base	write

Usage Guidelines

Usage Scenario

The entropy label is configured to address the severe load imbalance on a network. To configure the entropy label capability on the egress, run the entropy-label-capability enable command. Then, the entropy label capability can be enabled for tunnels to load-balance traffic.

Example

# Enable the entropy label capability on the egress.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] entropy-label-capability enable