delay-suppression enable (Event view)

Function

The delay-suppression enable command enables delayed event reporting.

The undo delay-suppression enable command disables delayed event reporting.

By default, delayed event reporting is enabled, so that no event is reported to the NMS in the delay.

Format

delay-suppression enable

undo delay-suppression enable

Parameters

None

Views

Event view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
fault-mgr	write

Usage Guidelines

If an event is repeatedly reported, you can enable delayed event reporting to prevent a large number of invalid events from being reported to the NMS. To enable delayed event reporting, run the delay-suppression enable command.

When this function is enabled, the system suppresses the event that is repeatedly reported.
When this function is disabled, the system does not suppress event reporting.

Example

# Enable delayed event reporting.

<HUAWEI> system-view
[~HUAWEI] event
[~HUAWEI-event] delay-suppression enable