data-delay-time

Function

The data-delay-time command sets a hold-off time for an mLDP P2MP tunnel to go Up.

The undo data-delay-time command deletes the hold-off time set for an mLDP P2MP tunnel to go Up.

By default, no hold-off time is set for an mLDP P2MP tunnel to go Up.

Format

data-delay-time delay-time

undo data-delay-time [ delay-time ]

Parameters

Parameter	Description	Value
delay-time	Specifies a hold-off time for an mLDP P2MP tunnel to go Up.	The value is an integer ranging from 1 to 300, in seconds.

Parameter

Description

Value

delay-time

Specifies a hold-off time for an mLDP P2MP tunnel to go Up.

The value is an integer ranging from 1 to 300, in seconds.

Views

EVI-IPMSI-ROOT view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bgp	write

Usage Guidelines

Usage Scenario

On a multicast EVPN, if you want an mLDP P2MP tunnel to go Up after all leaf nodes are configured, run the data-delay-time delay-time command to set a hold-off time for the mLDP P2MP tunnel to go Up.

Example

# Set the hold-off time to 200s for an mLDP P2MP tunnel to go Up.

<HUAWEI> system-view
[~HUAWEI] evpn vpn-instance evpn1 bd-mode
[*HUAWEI-evpn-instance-evpn1] inclusive-provider-tunnel
[*HUAWEI-evpn-instance-evpn1-inclusive] root
[*HUAWEI-evpn-instance-evpn1-inclusive-root] data-delay-time 200