mldp p2mp (EVI-IPMSI-ROOT view)

Function

The mldp p2mp command configures a BD-EVPN instance to use an mLDP P2MP tunnel to carry multicast services and displays the EVI I-PMSI root mLDP view.

The undo mldp p2mp command disables a BD-EVPN instance from using an mLDP P2MP tunnel to carry multicast services.

By default, a BD-EVPN instance does not use an mLDP P2MP tunnel to carry multicast services.

Format

mldp p2mp

undo mldp p2mp

Parameters

None

Views

EVI-IPMSI-ROOT view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bgp	write

Usage Guidelines

Usage Scenario

On a network where an EVPN carries multicast services, to reduce redundant traffic and conserve bandwidth resources, run the mldp p2mp command to configure a BD-EVPN instance to use an mLDP P2MP tunnel to carry multicast services.

Example

# Configure a BD-EVPN instance to use an mLDP P2MP tunnel to carry multicast services and enter the EVI I-PMSI root mLDP view.

<HUAWEI> system-view
[~HUAWEI] evpn vpn-instance evpn1 bd-mode
[*HUAWEI-evpn-instance-evpn1] inclusive-provider-tunnel
[*HUAWEI-evpn-instance-evpn1-inclusive] root
[*HUAWEI-evpn-instance-evpn1-inclusive-root] mldp p2mp
[*HUAWEI-evpn-instance-evpn1-inclusive-root-mldpp2mp]