esi dynamic-name

Function

The esi dynamic-name command configures a dynamic ESI instance with a specific name.

The undo esi dynamic-name command deletes a dynamic ESI instance.

By default, no dynamic ESI instance is created.

Format
Parameters
Views
Default Level
Task Name and Operations
Usage Guidelines
Example

Format

esi dynamic-name esi-name

undo esi dynamic-name esi-name

Parameters

Parameter	Description	Value
esi-name	Specifies the name of a dynamic ESI instance.	The value is a string of 1 to 31 case-sensitive characters starting with a letter, spaces not supported.

Parameter

Description

Value

esi-name

Specifies the name of a dynamic ESI instance.

The value is a string of 1 to 31 case-sensitive characters starting with a letter, spaces not supported.

Views

Global EVPN configuration view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bgp	write

Usage Guidelines

After a dynamic ESI instance is created, you need to run the esi dynamic command to bind the dynamic ESI instance to an Eth-Trunk interface on the access side.

Example

# Configure a dynamic ESI instance with a specific name.

<HUAWEI> system-view
[~HUAWEI] evpn
[*HUAWEI-evpn] esi dynamic-name esi1