segment-routing ipv6 locator (EVPL instance view)

Function

The segment-routing ipv6 locator command adds the SID attribute to the EVPN routes to be sent.

The undo segment-routing ipv6 locator command restores the default configuration.

By default, the SID attribute is not added to the EVPN routes to be sent.

Format

segment-routing ipv6 locator locator-name

undo segment-routing ipv6 locator [ locator-name ]

Parameters

Parameter	Description	Value
locator-name	Specifies the name of a SID node route locator.	The value is a string of 1 to 31 case-sensitive characters. When double quotation marks are used around the string, spaces are allowed in the string.

Parameter

Description

Value

locator-name

Specifies the name of a SID node route locator.

The value is a string of 1 to 31 case-sensitive characters. When double quotation marks are used around the string, spaces are allowed in the string.

Views

EVPL view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bgp	write

Usage Guidelines

Usage Scenario

In an EVPN VPWS scenario, if service traffic needs to be carried over an SRv6 path, run the segment-routing ipv6 locator command to add the SID attribute to the EVPN routes to be sent. Upon receipt of EVPN routes from a BGP EVPN peer, the local device can recurse routes over an SRv6 path based on the SID attribute carried in routes.

If a static SID is configured under the referenced locator, the static SID will be used first.

Example

# Add the SID attribute to the EVPN routes to be sent.

<HUAWEI> system-view
[~HUAWEI] evpn vpn-instance evrf1 vpws
[*HUAWEI-evpn-instance-evrf1] route-distinguisher 100:1
[*HUAWEI-evpn-instance-evrf1] vpn-target 1:1
[*HUAWEI-evpn-instance-evrf1] quit
[*HUAWEI] evpl instance 1
[*HUAWEI-evpl1] evpn binding vpn-instance evrf1
[*HUAWEI-evpl1] segment-routing ipv6 locator as