evpn stp-ring-id

Function

The evpn stp-ring-id command configures the ring-id of an interface.

The undo evpn stp-ring-id command deletes the ring-id of an interface.

By default, no ring-id of an interface is configured.

Format

evpn stp-ring-id ring-id

undo evpn stp-ring-id ring-id

undo evpn stp-ring-id

Parameters

Parameter	Description	Value
ring-id	Specifies the ring-id of an interface.	The value is an integer ranging from 0 to 16777215.

Parameter

Description

Value

ring-id

Specifies the ring-id of an interface.

The value is an integer ranging from 0 to 16777215.

Views

100GE interface view, 10GE interface view, 400GE interface view, 40GE interface view, Eth-Trunk interface view, GE optical interface view, GE electrical interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bgp	write

Usage Guidelines

Usage Scenario

The ring-id value specifies the dual-homing ID of a ring network. Two devices with the same ring ID are considered as two dual-homing PEs on the same ring network. During route advertisement between PEs, the ring ID carried in routes helps the PEs detect the connections on the same ring network.

Precautions

The ring-id is the dual-homing ID on a ring network. Therefore, the same ring ID cannot be configured on interfaces of a PE.

Example

# Configure a ring id.

<HUAWEI> system-view
[~HUAWEI] interface GigabitEthernet 0/1/0
[~HUAWEI-GigabitEthernet0/1/0] evpn stp-ring-id 100